Difference between revisions of "SETTINGS/General/Speed/Modifiers/First Layer Speed"
From MatterControl Manual
(Created page with "{{Slice Settings |The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (m...") |
|||
| Line 2: | Line 2: | ||
|The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (mm/s) | |The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (mm/s) | ||
| − | * | + | *percent [of [[Slice Settings/General/Speed/Speed for Infill/Infill|Infill speed]]] (%)| |
=== mm/s === | === mm/s === | ||
| Line 10: | Line 10: | ||
=== % === | === % === | ||
| − | In this example, the first layer will print at 35% | + | In this example, the first layer will print at 35% of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s. |
[[File:{{SUBPAGENAME}}-ss-ex1.png]] | [[File:{{SUBPAGENAME}}-ss-ex1.png]] | ||
Revision as of 16:55, 21 December 2015
Function
The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.
Parameters
- millimeters per second (mm/s)
- percent [of Infill speed] (%)
Example(s)
mm/s
In this example, the first layer will print at 20 mm/s.
%
In this example, the first layer will print at 35% of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s.
