Difference between revisions of "SETTINGS/General/Infill/Infill/Fill Density"

From MatterControl Manual
< SETTINGS‎ | General‎ | Infill‎ | Infill
Jump to: navigation, search
Line 11: Line 11:
 
*Standard: 30%
 
*Standard: 30%
 
*Heavy: 90%
 
*Heavy: 90%
*Custom: user-defined (can be % or ratio). Can be zero.|
+
*Custom: user-defined (can be % or ratio)|
  
 
=== % ===
 
=== % ===

Revision as of 12:17, 22 December 2015

A screenshot of the Fill Density setting as seen in MatterControl's SETTINGS pane.

Function

The amount of infill material to generate, expressed as a mathematical term-- specifically, ratio or a percentage.

Parameters

  • percent (%)
  • ratio

Can be zero.

Presets

  • Light: 10%
  • Standard: 30%
  • Heavy: 90%
  • Custom: user-defined (can be % or ratio)

Example(s)

%

Using a percentage. In this case, the infill will be 37% of the total area designated for infill.

Fill Density-ss-ex.png

ratio

Using a ratio from 0 to 1. In this case, 0.89 translates to 89%. Actual infill will be 89% of the total area designated for infill.

Fill Density-ss-ex1.png