2,552
edits
Changes
CONTROLS
,no edit summary
The pane can be [[Pop out|popped out]] into its own window. [[File:Pop out.png|link=Pop out]]
== [[ControlsCONTROLS/Temperature|Temperature]] ==
Temperature Controls for the extruder(s) and heated bed (if present).
== [[ControlsCONTROLS/Movement|Movement]] ==
Manual movement controls for the nozzle and extruder(s). X, Y, and Z movement controls switch to fine adjustment during prints.
== [[ControlsCONTROLS/Fan|Fan]] ==
Manual control of [[layer-cooling fan]] speed.
== [[ControlsCONTROLS/ATX Power Control|ATX Power Control]] ==
If the printer's controller board supports it, and if enabled through [[Settings/Printer/Features/Hardware/Has Power Control|Printer settings]], this section allows for direct control of the printer's main power.
== [[ControlsCONTROLS/Macros|Macros]] ==
The Macros section is for saving snippets of G-Code as easy-to-use buttons. The image on the right has a few examples, blurred as they may be since those particular buttons are not included with MatterControl by default.
== [[ControlsCONTROLS/Tuning Adjustment|Tuning Adjustment]] ==
Allows for manual adjustment of speed and extrusion during a print.
[[Category:Controls]]