Difference between revisions of "SETTINGS/General/Multiple Extruders/Extruder Change/Wipe Shield Distance"
From MatterControl Manual
< SETTINGS | General | Multiple Extruders | Extruder Change
(Created page with "{{Slice Settings |Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion. <nowiki>*</nowiki>Experimental feature.|*...") |
|||
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |Creates a perimeter around the part on which to wipe the other | + | |Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable. |
<nowiki>*</nowiki>Experimental feature.|*millimeters (mm)| | <nowiki>*</nowiki>Experimental feature.|*millimeters (mm)| | ||
Revision as of 18:28, 22 December 2015
Function
Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
*Experimental feature.
Parameters
- millimeters (mm)
Example(s)
mm
For this example, Calibration - Box.stl is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.
