Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Wipe Temperature"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.
+
|The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.
  
 
Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius
 
Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius

Revision as of 16:03, 12 January 2016

A screenshot of the Extruder Wipe Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature at which the extruder will wipe the nozzle, as specified by Custom G-Code.

Used only by Custom G-Code fields as a Custom GCode variable.

Parameters

  • degrees Celsius

Custom GCode Variable

extruder_wipe_temperature

Example(s)

degrees

In this example, the nozzle will heat to 145 degrees as specified in the Start GCode field, assuming the variable is used.

Extruder Wipe Temperature-ss-ex.png