Difference between revisions of "CONTROLS"
Line 19: | Line 19: | ||
Manual control of [[layer-cooling fan]] speed. | Manual control of [[layer-cooling fan]] speed. | ||
+ | |||
+ | == [[Controls/ATX Power Control|ATX Power Control]] == | ||
+ | |||
+ | If the printer's controller board supports it, and if enabled through [[Settings/Printer/Features/Hardware/Has Power Control|Printer settings]], this section allows for direct control of the printer's main power. | ||
== [[Controls/Macros|Macros]] == | == [[Controls/Macros|Macros]] == |
Revision as of 13:58, 2 March 2016
Navigation |
---|
|
The Controls pane is where available manual controls can be used and adjustments can be made during prints.
To access the Controls menu from the MatterControl main screen, click -->
The pane can be popped out into its own window.
Temperature
Temperature Controls for the extruder(s) and heated bed (if present).
Movement
Manual movement controls for the nozzle and extruder(s). X, Y, and Z movement controls switch to fine adjustment during prints.
Fan
Manual control of layer-cooling fan speed.
ATX Power Control
If the printer's controller board supports it, and if enabled through Printer settings, this section allows for direct control of the printer's main power.
Macros
The Macros section is for saving snippets of G-Code as easy-to-use buttons. The image on the right has a few examples, blurred as they may be since those particular buttons are not included with MatterControl by default.
Tuning Adjustment
Allows for manual adjustment of speed and extrusion during a print.