Difference between revisions of "SETTINGS/General/Multiple Extruders/Extruder Change/Wipe Shield Distance"
From MatterControl Manual
< SETTINGS | General | Multiple Extruders | Extruder Change
m (MatterHackers moved page Slice Settings/General/Multiple Extruders/Extruder Change/Wipe Shield Distance to Settings/General/Multiple Extruders/Extruder Change/Wipe Shield Distance without leaving a redirect) |
|||
| Line 9: | Line 9: | ||
For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used. | For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used. | ||
| − | In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.}} | + | In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.}} |
Revision as of 10:30, 18 May 2016
Function
Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
*Experimental feature.
Parameters
- millimeters (mm)
Example(s)
mm
For this example, Calibration - Box.stl is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.
