Difference between revisions of "SETTINGS/General/Raft-Priming/Raft/Air Gap"

Revision as of 16:52, 14 November 2016

A screenshot of the Air Gap setting as seen in MatterControl's SETTINGS pane.

Function

The distance between the first layer and the top of the raft. A good value is typically about half the extrusion diameter. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.

Parameters

• millimeters (mm)

Example(s)

mm

In this example, a 0.2 mm gap will be left between the raft and the first layer.