Difference between revisions of "SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Bed Temperatures
m (MatterHackers moved page Slice Settings/Filament/Filament/Bed Temperatures/Bed Temperature to Settings/Filament/Filament/Bed Temperatures/Bed Temperature) |
m (MatterHackers moved page Settings/Filament/Filament/Bed Temperatures/Bed Temperature to Settings/Filament/Temperatures/Bed Temperatures/Bed Temperature) |
(No difference)
| |
Revision as of 17:54, 14 November 2016
Function
The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.
Parameters
- degrees Celsius
Custom G-Code Variable
bed_temperature
Example(s)
degrees
In this example, the bed will be set to 50 degrees Celsius for the print.
