Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Wipe After Retract"

From MatterControl Manual
Jump to: navigation, search
(No difference)

Revision as of 12:37, 1 December 2016

A screenshot of the Wipe After Retract setting as seen in MatterControl's SETTINGS pane.

Function

The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Wipe After Retract-ss-ex.png

The check box is unchecked to leave the function unused.

Wipe After Retract-ss-ex1.png

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Retraction/While_Printing/Wipe_After_Retract&oldid=3296"