Difference between revisions of "SETTINGS/Printer/Print Recovery/Recover Settings/Recover Layer Speed"

From MatterControl Manual
Jump to: navigation, search
(No difference)

Revision as of 13:37, 1 December 2016

A screenshot of the Recover Layer Speed setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the nozzle will move when recovering a failed print, for one layer.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In this example the nozzle will move at 10 mm/s whilst printing the layer the printer was on when it failed.

Recover Layer Speed-ss-ex.png