Difference between revisions of "SETTINGS/Printer/Print Leveling/Probe Settings/Start Height"
From MatterControl Manual
< SETTINGS | Printer | Print Leveling | Probe Settings
(Created page with "{{Slice Settings |The starting height (Z) of the print head before probing each print leveling position.|*millimeters (mm)| }}") |
(No difference)
|
Latest revision as of 09:34, 1 August 2017
Function
The starting height (Z) of the print head before probing each print leveling position.
Parameters
- millimeters (mm)
Example(s)
