Difference between revisions of "SETTINGS/General/Raft-Priming/Brim/Distance or Loops"

Revision as of 11:24, 1 August 2017

A screenshot of the Distance or Loops setting as seen in MatterControl's SETTINGS pane.

The distance or number of loops to draw around the part, attached to the part. Used to provide additional bed adhesion. This is often called a brim.

In this example, the part will have five additional loops around the part to help hold it to the bed.

In this example, the part will have loops made from 15mm of extrusion around the part to help hold it to the bed.

@@ Line 1: / Line 1: @@
 {{Slice Settings1
-|The number of loops to draw around the part, attached to the part. Used to provide additional bed adhesion. This is often called a brim.|*count|
+|The distance or number of loops to draw around the part, attached to the part. Used to provide additional bed adhesion. This is often called a brim.|*count|
 === count ===
-In this example, the part will have seven additional loops around the part to help hold it to the bed.}}
+In this example, the part will have five additional loops around the part to help hold it to the bed.}}
+=== mm ===
+In this example, the part will have loops made from 15mm of extrusion around the part to help hold it to the bed.
+[[File:Distance or Loops1-ss-ex1.png]]