Difference between revisions of "SETTINGS/General/Speed/Speed for Other Printing/Support Material"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Other Printing
(Created page with "{{Slice Settings1 |The speed at which support material structures will be printed.|Millimeters per second| === mm/s === In this example, the support material will print at...") |
|||
| Line 1: | Line 1: | ||
{{Slice Settings1 | {{Slice Settings1 | ||
| − | |The speed at which support material structures will be printed.|Millimeters per second| | + | |The speed at which support material structures will be printed.|Millimeters per second (mm/s)| |
=== mm/s === | === mm/s === | ||
In this example, the support material will print at 35 mm/s.}} | In this example, the support material will print at 35 mm/s.}} | ||
Revision as of 17:14, 18 December 2015
Function
The speed at which support material structures will be printed.
Parameters
Millimeters per second (mm/s)
Example(s)
mm/s
In this example, the support material will print at 35 mm/s.
