Print Center
From MatterControl Manual
< SETTINGS | Printer | Print Area | Size and Coordinates
Revision as of 12:56, 20 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/Printer/Print Area/Size and Coordinates/Print Center to Settings/Printer/Print Area/Size and Coordinates/Print Center without leaving a redirect)
Function
The position (X and Y coordinates) of the center of the print bed, in millimeters.
For printers with a rectangular bed, these two values are usually positive as the origin is at the bottom left corner of the bed. For printers with a circular bed, the origin is in the middle of the circle.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the center of the print bed is 100 millimeters from the left side of the bed along the X axis and 75 millimeters from the bottom of the bed along the Y axis.
