Layer Height
From MatterControl Manual
< SETTINGS | General | Layers-Surface | Layer Height
Revision as of 15:39, 20 January 2016 by MatterHackers (Talk | contribs)
Function
The height of each layer of the print, except the first. A smaller number will create more layers and more vertical accuracy but also a slower print.
Parameters
- millimeters (mm)
Presets
- Fine : 0.1
- Standard : 0.2
- Course : 0.3
- Custom : user-defined
Example(s)
mm
Shown here in Layer View#3D, this 10mm high box has a layer height of 0.2mm.
