Raft
< SETTINGS | General | Speed | Speed for InfillRevision as of 17:03, 18 December 2015 by MatterHackers (Talk | contribs)
Revision as of 17:03, 18 December 2015 by MatterHackers (Talk | contribs)
Contents
Function
The speed at which the layers of the raft (other than the first layer) are printed.
Parameters
Millimeters per second or percentage [of Infill speed]
Example(s)
mm/s
In this example, the raft infill will print at 35 mm/s.
%
In this example, the raft infill will print at 75% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 30 mm/s.
