Fill Density

A screenshot of the Fill Density setting as seen in MatterControl's SETTINGS pane.

Function

The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.

Parameters

• percentage (%)
• ratio

Can be zero.

Presets

• Light: 10%
• Standard: 30%
• Heavy: 90%
• Custom: user-defined (can be % or ratio). Can be zero.

Example(s)

%

Using a percentage. In this case, the infill will be 37% of the total area designated for infill.

Ratio

Using a ratio from 0 to 1. In this case, 0.89 translates to 89%. Actual infill will be 89% of the total area designated for infill.