Top Solid Infill

A screenshot of the Top Solid Infill setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the top solid layers will print.

Parameters

• millimeters per second (mm/s)
• percent [of Infill speed] (%)

Example(s)

mm/s

In this example, the top solid infill will print at 30 mm/s.

%

In this example, the top solid infill will print at 50% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 20 mm/s.