Distance or Loops
From MatterControl Manual
< SETTINGS | General | Raft-Priming | Skirt
Revision as of 12:12, 1 August 2017 by MatterHackers (Talk | contribs)
Function
The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.
Parameters
- count
- mm
Example(s)
count
In this example, two priming loops will be drawn around the model.
mm
In this example, a skirt that is 20 mm of extrusion will be drawn.