Wipe Shield Distance

From MatterControl Manual
< SETTINGS‎ | General‎ | Multiple Extruders‎ | Extruder Change
Revision as of 18:26, 22 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion. <nowiki>*</nowiki>Experimental feature.|*...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Wipe Shield Distance setting as seen in MatterControl's SETTINGS pane.

Function

Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion.

*Experimental feature.

Parameters

  • millimeters (mm)

Example(s)

mm

For this example, Calibration - Box.stl is the model used.

In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.

Wipe Shield Distance-ss-ex.png