Wipe After Retract

From MatterControl Manual
< SETTINGS‎ | Filament‎ | Retraction‎ | While Printing
Revision as of 15:59, 30 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.|*Boolean| === Boolean === The check box is checked to use the f...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Wipe After Retract setting as seen in MatterControl's SETTINGS pane.

Function

The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Wipe After Retract-ss-ex.png

The check box is unchecked to leave the function unused.

Wipe After Retract-ss-ex1.png

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Retraction/While_Printing/Wipe_After_Retract&oldid=1108"