Minimum Print Speed
From MatterControl Manual
< SETTINGS | Filament | Cooling | Cooling Thresholds
Revision as of 11:23, 13 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/Filament/Cooling/Cooling Thresholds/Minimum Print Speed to Slice Settings/Filament/Cooling/Fan Speed/Minimum Print Speed without leaving a redirect)
Function
The minimum speed to which the printer will reduce in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
Parameters
- millimeters per second (mm/s)
Example(s)
mm/s
In this example, the printer will print at no less than 5 mm/s if required to slow down in order to attempt to satisfy the minimum layer time.