Speed
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
Revision as of 14:23, 30 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s)| === mm/s === In this example, filament...")
Function
The speed at which filament will retract and re-extrude until the next print move.
Parameters
- millimeters per second (mm/s)
Example(s)
mm/s
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.