Z Offset
< SETTINGS | Printer | Print Area | Size and CoordinatesRevision as of 11:34, 13 January 2016 by MatterHackers (Talk | contribs)
Revision as of 11:34, 13 January 2016 by MatterHackers (Talk | contribs)
Contents
Function
The distance to move the nozzle along the Z axis to ensure that it is the correct distance from the print bed. A positive number will raise the nozzle, and a negative number will lower it.
Parameters
- millimeters (mm)
Can be zero.
Can be negative.
Custom GCode Variable
z_offset
Example(s)
mm
In this example, all values for the Z position will be offset by 0.2 mm so the nozzle will be 0.2 mm higher than it would normally have been.
