Wipe Shield Distance
From MatterControl Manual
< SETTINGS | General | Multiple Extruders | Extruder Change
Revision as of 12:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/General/Multiple Extruders/Extruder Change/Wipe Shield Distance to SETTINGS/General/Multiple Extruders/Extruder Change/Wipe Shield Distance)
Function
Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
*Experimental feature.
Parameters
- millimeters (mm)
Example(s)
mm
For this example, Calibration - Box.stl is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.
