Disable Fan For The First

From MatterControl Manual
< SETTINGS‎ | Filament‎ | Cooling‎ | Fan Speed
Revision as of 12:36, 31 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The number of layers for which the layer cooling fan will be forced off at the start of the print.|*count (layers) Can be zero.| === layers === In th...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Disable Fan For The First setting as seen in MatterControl's SETTINGS pane.

Function

The number of layers for which the layer cooling fan will be forced off at the start of the print.

Parameters

  • count (layers)

Can be zero.

Example(s)

layers

In this example, the layer cooling fan will be off for the first two layers of the print, after which it will function according to the other cooling settings.

Disable Fan For The First-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Cooling/Fan_Speed/Disable_Fan_For_The_First&oldid=1164"