Diameter

< SETTINGS‎ | Filament‎ | Material‎ | Properties

Revision as of 15:49, 23 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.|*millimeter...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 15:49, 23 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.|*millimeter...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A screenshot of the Diameter setting as seen in MatterControl's SETTINGS pane.

Function

The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.

Parameters

millimeters (mm)

Example(s)

mm

In this example, the filament diameter is 1.75 mm.

File:Diameter-ss-ex1.png

Last modified on 4 January 2019, at 18:47