Z Lift

< SETTINGS‎ | Filament‎ | Retraction‎ | While Printing

Revision as of 14:32, 30 December 2015 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 14:32, 30 December 2015 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A screenshot of the Z Lift setting as seen in MatterControl's SETTINGS pane.

Function

The distance the nozzle will lift after each retraction.

Parameters

millimeters (mm)

Can be zero.

Example(s)

mm

In this example, the nozzle will lift 0.3 mm after every retraction.

Z Lift-ss-ex.png

Last modified on 9 April 2019, at 10:40