Minimum Print Speed
< SETTINGS | Filament | Cooling | Cooling ThresholdsRevision as of 12:55, 31 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The minimum speed to which the printer will reduce in order to attempt to make the layer print time long enough to satisfy the Slice Settings/Filament/Coo...")
Revision as of 12:55, 31 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The minimum speed to which the printer will reduce in order to attempt to make the layer print time long enough to satisfy the Slice Settings/Filament/Coo...")
Function
The minimum speed to which the printer will reduce in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
Parameters
- millimeters per second (mm/s)
Example(s)
mm/s
In this example, the printer will print at no less than 5 mm/s if required to slow down in order to attempt to satisfy the minimum layer time.
