G-Code Output
< SETTINGS | Printer | Features | BehaviorRevision as of 17:49, 11 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The version of G-Code the printer's firmware communicates with.|Available as presets only: *REPRAP *ULTIGCODE *BFB *MACH3| === REPRAP === The most common...")
Revision as of 17:49, 11 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The version of G-Code the printer's firmware communicates with.|Available as presets only: *REPRAP *ULTIGCODE *BFB *MACH3| === REPRAP === The most common...")
Function
The version of G-Code the printer's firmware communicates with.
Parameters
Available as presets only:
- REPRAP
- ULTIGCODE
- BFB
- MACH3
Example(s)
REPRAP
The most common version of G-Code. Documentation of commands can be found on the RepRap wiki.
ULTIGCODE
Used with Ultimaker printers.
BFB
Stands for Bits For Bytes, a 3D printer manufacturer that no longer exists having been purchased by 3D Systems in 2010.
MACH3
A version of G-Code common to CNC mills.
