Length on Move
< SETTINGS | Filament | Retraction | While PrintingRevision as of 11:35, 13 January 2016 by MatterHackers (Talk | contribs)
Revision as of 11:35, 13 January 2016 by MatterHackers (Talk | contribs)
Contents
Function
The distance filament will reverse before each qualifying non-print move.
Parameters
- millimeters (mm)
Can be zero.
Custom GCode Variable
retract_length
Example(s)
mm
In this example, filament will reverse 6.8 mm before travelling 20 mm or more.
