Minimum Print Speed
< SETTINGS | Filament | Cooling | Cooling ThresholdsRevision as of 10:42, 13 January 2016 by MatterHackers (Talk | contribs)
Revision as of 10:42, 13 January 2016 by MatterHackers (Talk | contribs)
Function
The minimum speed to which the printer will reduce in order to attempt to make the layer print time long enough to satisfy the minimum layer time.
Parameters
- millimeters per second (mm/s)
Custom GCode Variable
min_print_speed
Example(s)
mm/s
In this example, the printer will print at no less than 5 mm/s if required to slow down in order to attempt to satisfy the minimum layer time.
