Speed
< SETTINGS | Filament | Retraction | While PrintingRevision as of 10:42, 13 January 2016 by MatterHackers (Talk | contribs)
Revision as of 10:42, 13 January 2016 by MatterHackers (Talk | contribs)
Function
The speed at which filament will retract and re-extrude until the next print move.
Parameters
- millimeters per second (mm/s)
Custom GCode Variable
retract_speed
Example(s)
mm/s
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.
