Wipe Shield Distance
< SETTINGS | General | Multiple Extruders | Extruder ChangeRevision as of 09:30, 18 May 2016 by MatterHackers (Talk | contribs)
Revision as of 09:30, 18 May 2016 by MatterHackers (Talk | contribs)
Function
Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
*Experimental feature.
Parameters
- millimeters (mm)
Example(s)
mm
For this example, Calibration - Box.stl is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.
