SETTINGS

Navigation

Welcome to the Slice Settings main page! Below you will find links to the categories, sub-categories, and sections of settings for MatterSlice, as well as information about the menus and options available.

To access the Slice Settings menu from the MatterControl main screen, click -->

The pane can be popped out into its own window.

General	Filament	Printer
Layers / Surface	Filament	Print Area
Infill	Extrusion	Features
Speed	Cooling	Print Leveling
Raft / Priming		Custom G-Code
Support Material		Extruder
Output Options
Multiple Extruders

These menus allow the user to save one or more settings as a preset list under one name instead of changing every setting for a particular material or desired quality individually.

Both menus essentially do the same thing; the difference is that the QUALITY menu is meant to hold presets of settings unique to different desired qualities and the MATERIAL menu is meant to hold presets of settings unique to different filaments. If a selected preset in both menus each contain the same setting, the setting specified in the MATERIAL preset menu trumps the one in the QUALITY menu.

Pre-configured Presets

Many printer profiles come pre-configured with presets for common filaments and quality settings. The availability of these presets varies widely depending on the printer manufacturers and MatterHackers' internal test and support department.

Adding custom presets

Custom .ini files can be placed in the program directory/StaticData/PrinterSettings/PrinterManufacturer/Printer/material OR quality folder.

When checked, an explanation for each function will be revealed underneath its name.

This menu allows the user to choose between three levels of settings complexity:

Basic:		The minimal settings group for beginners or those who want to print quickly. More info: SLICE SETTINGS EXPLAINED - PART 1
Standard:		A few more settings than the Basic level, but not the complete list. More info: SLICE SETTINGS EXPLAINED - PART 2
Advanced:		All MatterSlice slice settings displayed. More info: SLICE SETTINGS EXPLAINED - PART 3

The Options... menu has two functions: Import and Export.

• Import allows the user to load a slice settings file (.slice, .ini) into MatterControl. Any existing values will be replaced by those in the file.
• Export allows the user to save all current slice settings values to file.