Z Lift
< SETTINGS | Filament | Retraction | While PrintingRevision as of 13:36, 21 November 2016 by MatterHackers (Talk | contribs)
Revision as of 13:36, 21 November 2016 by MatterHackers (Talk | contribs)
Function
The distance the nozzle will be lifted during non-printing moves (after each retraction happens). This ensures that the nozzle will not be dragged across the top of the object.
Parameters
- millimeters (mm)
Can be zero.
Example(s)
mm
In this example, the nozzle will lift 1 mm after every retraction.
