Open main menu

Recover Layer Speed

< SETTINGS‎ | Printer‎ | Print Recovery‎ | Recover Settings
Revision as of 17:30, 21 November 2016 by MatterHackers (Talk | contribs)

Revision as of 17:30, 21 November 2016 by MatterHackers (Talk | contribs)

A screenshot of the Recover Layer Speed setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the nozzle will move when recovering a failed print, for one layer.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In this example the nozzle will move at 10 mm/s whilst printing the layer the printer was on when it failed.

Recover Layer Speed-ss-ex.png
Last modified on 6 December 2016, at 17:32