Open main menu

Require Leveling To Print

< SETTINGS‎ | Printer‎ | Print Leveling‎ | Machine Settings
Revision as of 17:27, 6 December 2016 by MatterHackers (Talk | contribs)

Revision as of 17:27, 6 December 2016 by MatterHackers (Talk | contribs)

A screenshot of the Require Leveling To Print setting as seen in MatterControl's SETTINGS pane.

Function

The printer requires print leveling to run correctly.

Enabling this function will hide the On/Off switch used to toggle Software Print Leveling in the OPTIONS menu.

Restrictions

  • This section (Print Recovery) is not shown when Has Hardware Leveling is enabled as only one form of leveling can be used at a time.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Require Leveling To Print-ss-ex.png

The check box is unchecked to leave the function unused.

Require Leveling To Print-ss-ex1.png

Last modified on 6 December 2016, at 17:34