Open main menu

XY Homing Position

< SETTINGS‎ | Printer‎ | Print Recovery‎ | Recover Settings
Revision as of 17:32, 6 December 2016 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 17:32, 6 December 2016 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
A screenshot of the XY Homing Position setting as seen in MatterControl's SETTINGS pane.

Function

Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print.

Restrictions

  • Not shown when Has Hardware Leveling is enabled as G29 procedures could interfere with a partially-completed print.
  • Not shown when Home Z Max is enabled as homing up would not interfere with a partially-completed print.

Parameters

  • millimeters (mm)

Example(s)

mm

In this example, the best coordinates on the X and Y axes for the printer to home the Z axis are 185, 190.

XY Homing Position-ss-ex.png
Last modified on 6 December 2016, at 17:32