Open main menu

Sailfish Communication

< SETTINGS‎ | Printer‎ | Features‎ | Hardware
Revision as of 16:01, 31 July 2017 by Tanderson (Talk | contribs) (Created page with "{{Slice Settings |Sets MatterControl to use the S3G communication protocol instead of raw G-Code. This is the method used by Makerbot, Flashforge, and other similar printers....")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 16:01, 31 July 2017 by Tanderson (Talk | contribs) (Created page with "{{Slice Settings |Sets MatterControl to use the S3G communication protocol instead of raw G-Code. This is the method used by Makerbot, Flashforge, and other similar printers....")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
A screenshot of the Sailfish Communication setting as seen in MatterControl's SETTINGS pane.

Function

Sets MatterControl to use the S3G communication protocol instead of raw G-Code. This is the method used by Makerbot, Flashforge, and other similar printers. You must disconnect and reconnect for this to take effect.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Sailfish Communication-ss-ex.png

The check box is unchecked to leave the function unused.

Sailfish Communication-ss-ex1.png

Last modified on 31 July 2017, at 16:01