Open main menu

Has Z Probe

< SETTINGS‎ | Printer‎ | Features‎ | Hardware
Revision as of 16:12, 31 July 2017 by Tanderson (Talk | contribs) (Created page with "{{Slice Settings |The printer has a probe on the Z axis for bed leveling measurements.|*Boolean| === Boolean === The check box is checked to use the function.}} The check...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 16:12, 31 July 2017 by Tanderson (Talk | contribs) (Created page with "{{Slice Settings |The printer has a probe on the Z axis for bed leveling measurements.|*Boolean| === Boolean === The check box is checked to use the function.}} The check...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
A screenshot of the Has Z Probe setting as seen in MatterControl's SETTINGS pane.

Function

The printer has a probe on the Z axis for bed leveling measurements.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Has Z Probe-ss-ex.png

The check box is unchecked to leave the function unused.

Has Z Probe-ss-ex1.png

Last modified on 31 July 2017, at 16:12