Open main menu

Retraction

< SETTINGS‎ | Filament
Revision as of 16:07, 16 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings Category|the speed at which specific parts of the print are printed.}} == Sub-sections == === Filament === <DynamicPageList> category = Filamen...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 16:07, 16 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings Category|the speed at which specific parts of the print are printed.}} == Sub-sections == === Filament === <DynamicPageList> category = Filamen...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The Retraction sub-category as shown in the MatterControl SETTINGS pane.

Retraction is a sub-category of Filament settings which deal with the speed at which specific parts of the print are printed.

Sub-sections

Filament

No pages meet these criteria.

Extruder Temperature (C)

No pages meet these criteria.

Bed Temperature (C)

No pages meet these criteria.

Retraction

No pages meet these criteria.

Last modified on 1 December 2016, at 12:52