Layer Height

< SETTINGS‎ | General‎ | Layers-Surface‎ | Layer Height
Revision as of 14:44, 17 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.|Millimeters| === m...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 14:44, 17 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.|Millimeters| === m...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
A screenshot of the Layer Height setting as seen in MatterControl's SETTINGS pane.

Function

Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.

Parameters

Millimeters

Example(s)

mm

Shown here in 3D Layer View, this 10mm high box has a layer height of 0.2mm.


Layer Height-ss-ex.png