Outside Perimeter
< SETTINGS | General | Speed | Speed for PerimetersRevision as of 16:36, 18 December 2015 by MatterHackers (Talk | contribs)
Revision as of 16:36, 18 December 2015 by MatterHackers (Talk | contribs)
Function
The speed at which outside, external, or the otherwise visible perimeters will be printed.
Parameters
Millimeters per second or percentage [of inside perimeters].
Example(s)
mm/s
In this example, the outside perimeters will print at 25 mm/s.
%
Caption for example for Parameter 2.
