Support Material
< SETTINGS | General | Speed | Speed for Other PrintingRevision as of 16:49, 18 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings1 |The speed at which support material structures will be printed.|Millimeters per second| === mm/s === In this example, the support material will print at...")
Revision as of 16:49, 18 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings1 |The speed at which support material structures will be printed.|Millimeters per second| === mm/s === In this example, the support material will print at...")
Function
The speed at which support material structures will be printed.
Parameters
Millimeters per second
Example(s)
mm/s
In this example, the support material will print at 35 mm/s.
