Outside Perimeter
< SETTINGS | General | Speed | Speed for PerimetersRevision as of 16:54, 21 December 2015 by MatterHackers (Talk | contribs)
Revision as of 16:54, 21 December 2015 by MatterHackers (Talk | contribs)
Function
The speed at which outside, external, or the otherwise visible perimeters will print.
Parameters
- millimeters per second (mm/s)
- percent [of inside perimeters] (%).
Example(s)
mm/s
In this example, the outside perimeters will print at 25 mm/s.
%
In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.
