|
|
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/. |
Function
Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
*Experimental feature.
Parameters
- millimeters (mm)
Example(s)
mm
For this example, Calibration - Box.stl is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.
