Open main menu

Changes

SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Remove Part Temperature

10 bytes added, 18:37, 13 January 2016
Undo revision 1300 by MatterHackers (talk)
== [[Custom GCode Variables|Custom GCode Variable]] ==
<code>filament_diameterbed_remove_part_temperature</code>|
=== degrees ===
In this example, the bed will cool to 55 degrees after the print as specified in the [[Slice Settings/Printer/Custom G-Code/End G-Code|End GCode]] field, assuming the variable is used.}}