2,552
edits
Changes
no edit summary
__NOTOC__{{DISPLAYTITLE:Temperature}}[[File:Temperature-ss.png|right|framed|<center>The 'Temperature' section of the Controls pane.</center>]]
The printer's extruder and heated bed (if present) can be heated manually by either entering a value in the related field, or from the respective value in the slice settings.
Presets can be set for the extruder and bed temperatures are available.
<br clear=all>
== Extruder Temperature ==
=== Target ===
The intended temperature of the bed, in degrees Celsius. The printer will attempt to reach this value automaticallywhen the difference of the Actual and Target Temperatures is more than 0.5°C, whether it is higher or lower than the Actual temperature.
To set a value: click the box, enter a value, then click the 'SET' button or hit enter.
== Temperature Shortcut Presets ==
[[File:Temperature Shortcut Presets-ssEdit.png|framed|right|<center>Click the pencil icon to open the presets window.</center>]]Temperature Shortcut Presets are available for both the Extruder Temperature(s) and the Bed Temperature. Click the pencil icon ([[File:Pencil-edit.png]]) to the right of the name to open the respective window.
Up to three presets can be saved. They will be listed in order of temperature, from lowest to highest.
[[File:Temperature Shortcut Presets-Editss.png|framed|none|<center>Click the pencil icon to open the presets window.</center>]]
=== Label ===
Something
[[File:Temperature-Presets-ss.png|nonecenter|framed|<center>The 'ABS' example preset presets in use.</center>]]
[[Category:Features]]
[[Category:Incomplete]]
[[Category:Controls]]